page 1 of 4 dc/dc converters tep 160 series, 150 C 196 watt features compact metal package wide 2:1 input voltage ranges 16.5C36, 33C75 vdc very high effciency up to 93% no minimum load soft start ajustable output voltage +10/-20% sense line remote on/off input reverse input voltage protection over temperature protection optional heatsink 3-year product warranty the tep 160 series is a family of isolated high performance dc-dc converter modules with wide 2:1 input voltage ranges which come in a rugged, sealed industry stan - dard half brick package. a very high effciency allows full power operation without forced air cooling at 25c this temperature can be increased to 40c with optional mounted heatsink or up to 60c when mounted on an iron base plate. the very wide input voltage range and reverse input voltage protection make these converters interesting solution for battery operated systems. typical applications are in telecom/datacom, industry control and railway systems for on board power distribution. these series is available in many optional designs on demand --> see options. order code input voltage output voltage output current max. effciency typ. tep 160C2412 12 vd c 13 a 92 % tep 160C2413 16.5 C 36 vdc 15 vd c 10 a 92 % tep 160C2415 (24 vdc nominal) 24 vdc 6.5 a 93 % tep 160C2416 28 vdc 5.5 a 93 % tep 160C2418 48 vdc 3.3 a 92 % tep 160C4812 12 vd c 16 a 92 % tep 160C4813 15 vd c 13 a 93 % tep 160C4815 33 C 75 vdc 24 vdc 8 a 92 % tep 160C4816 (48 vdc nominal) 28 vdc 7 a 92 % tep 160C4818 48 vdc 4 a 92 % tep 160C48153 53 vdc 3.7 a 92 % standard models (models pictured with optional heatsink) tep-hs1 heat-sink for standard version (incl. mounting screws and thermal pad) tep-mk1 din-rail mounting kit for chassis mount models (incl. mounting screws) tck-xxx common mode chokes for flter proposals to meet en55022 class a/b --> see application note on demand models with 3.3 vdc/~ 40 a or 5.0 vdc/~ 30 a output negative (passive = off) remote on/off function (standard is passive = on) sync pin to synchronize switching frequency of up to 3 units (emc reason) options http://www.tracopower.com
page 2 of 4 input specifications input current at no load (nominal input voltage) 24 v models: 35 ma typ. 48 v models: 25 ma typ. start-up voltage 24 v models: 18 vdc max. 48 v models: 34 vdc max. under voltage shut down 24 v models: 15.5 C 16.3 vdc 48 v models: 31.6 C 32.5 vdc surge voltage (1 sec. max.) 24 v models: 50 vdc 48 v models: 100 vdc conducted noise en 55022 class a/b with external components see application note esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 20 v/m, perf. criteria a fast transient / surge en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv perf. criteria a with external input filter capacitor: 24/48v models: chemi-con ky 220 f, 100 v, esr 48 mohm conducted immunity en 61000-4-6, 10 vrms, perf. criteria a reverse voltage protection parallel diode recommended input fuse (slow blow) 24 v models: 20 a 48 v models: 10 a output specifications voltage set accuracy (at full load, nominal input) 1 % output voltage adjustment +10 % / C20 % by external resistor see application note regulation C input variation vin min. to vin max. 0.1 % max. C load variation (0 C 100 %) 0.1 % max. temperature coefficient 0.02 %/k minimum load not required remote sense 10 % max. of vout nom. (trim up value to subtract) ripple and noise (20 mhz bandwidth) 12 C 15 vdc models: 100 mvp-p typ. 24 C 28 vdc models: 200 mvp-p typ. 48 C 53 vdc models: 300 mvp-p typ. start up time (nominal vin and constant resistive load) 75 ms typ. (at power on or remote on) transient response (25 % load step change) 250 s typ. output current limitation at 120 C 150 % of iout max. over voltage protection at 115 C 130 % of vout nom. short circuit protection indefinite, automatic recovery. capacitive load 12 vdc models: 10800 / 13300 f 15 vdc models: 660 0 / 860 0 f 24 vdc models: 2700 / 3300 f 28 vdc models: 1900 / 2500 f 48 vdc models: 680 / 830 f 53 vdc model: 690 f dc/dc converters tep 160 series 150 C 196 watt http://www.tracopower.com
page 3 of 4 general specifications temperature ranges C operating C40c to +75c C case temperature +115 c m a x . C storage C55c to +125c thermal impedance C without heat-sink 6.1c/w C with heat-sink 5.1c/w power derating depending on installation! C without heat-sink 1.5 %/k above +25c C with heat-sink 1.5 %/k above +40c C with iron base plate (19 x 3.5 x 0.063) 1.8 %/k above +60c please refer to application note for temperature measure point that should not exceed 115c. over temperature protection at +120c thermal shock mil-std-810f humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) 75000 h isolation voltage (60sec.) C input/output 2250 vdc (basic insulation) C input/case 16 0 0 v d c isolation capacitance C input/output 2500 pf max. isolation resistance C input/output (500 vdc) >1 gohm min. switching frequency 250 khz typ. (puls width modulation) safety standards ul 60950-1, iec/en 60950-1 safety approvals C online certification for ul/cul 60950-1 www.ul.com/database -> file e188913 www.tracopower.com/ul-files remote on/off C positive logic (standard) C on: 3 to 12 vdc or open circuit C off: 0 to 1.2 vdc or short circuit pin 1 and 3 C negative logic (option) C on: 0 to 1.2 vdc or short circuit pin 1 and 3 C off: 3 to 12 vdc or open circuit C off idle current: 3 ma environmental compliance C reach www.tracopower.com/products/tep160-reach.pdf C rohs rohs directive 2011/65/eu general specifications casing material metal potting material silicon (ul94v-0 rated) base material fr4 vibration mil-std-810f application note: www.tracopower.com/products/tep160-application.pdf dc/dc converters tep 160 series 150 C 196 watt http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com page 4 of 4 rev. november 11. 2013 dc/dc converters tep 160 series 150 C 196 watt 0.20 0.5 0.023 2.40 2.00 0.30 0.70 1.00 1.90 0.19 2.28 (57.9) 1 2 3 4 5 6 8 9 7 4 x m3 thd (48.26) (4.8) (50.80) (61.0) (17.78) (12.7) (25.40) bottom view (7.62) (0.6) (5.1) (trough hole) t op view 0.95 0.45 (24.2) (11.4) 2.40 (61.0) 2.28 (57.9) tep 160 module dimensions in inch, () = mm tolerances 0.02 (0.5) pin pich tolerances 0.01 (0.25) mounting hole pich tolerances 0.01 (0.25) weight: 105g (3.70oz) pin-out *sense line to be connected to the output either at the module or at the load under regard of polarity. weight: 142g (5.01oz) (heatsink + converter) order code: tep-hs1 includes heatsink with termal pad and mounting screws to order modules with mounted heatsink ask factory. pin diameter pin 5 & 9: 0.08 (2.0) pin diameter other pins: 0.04 (1.0) tep-hs1 heatsink (pictured with heatsink mounted) dimensions pin 1 C vin 2 case 3 remote on/off 4 + vin 5 C vout 6 C sense 7 trim 8 + sense 9 + vout
|
